Do you like shawarma? Now it can be done at home. To do this, you will need a homemade shawarma grill, which can be made from a gas cylinder.
It is advisable to use a cylinder of 27 liters - this is the most optimal volume. The first step is to unscrew the valve at the top to fill the tank with water.
The author did not succeed in unscrewing the valve, so he sawed it off with a hand hacksaw for metal (no grinder). Then you need to cut a rectangular hole in the center.
The main stages of work
The next step will require a flywheel crown. Inside, you will need to weld a disk and three pieces of steel square. Then in the center of the disk you will need to drill a hole.
A through hole must also be drilled in the bottom of the container. Then the crown of the flywheel will need to be planted on the shaft, which is inserted into the hole in the cylinder and scalded.
After that, the author cuts a door in a cylinder - cuts out part of the wall with a grinder and welds it on hinges. Latches are installed on the other side of the door.
To the inside of the door, the author welds the grate - as a result, a compartment for laying the coal is obtained.
At the last stage, it remains only to install the drive (electric motor), clean the metal and paint it with spray paint.
For details on how to make a grill from a gas cylinder for cooking shawarma, see the video on the website.
