Share
Pin
Tweet
Send
Share
Send
It seems to me that every craftsman or craftsman should have such a storage design for the right tool.
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta.jpg)
Making tool holders and organizing a workplace
3D model of the future workplace. Of course, it is not necessary to do it, but I love accuracy in everything.
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-2.jpg)
Two identical holders for keys, screwdrivers, files, etc.
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-3.jpg)
I laid out the tool in a ruler to figure out what the distance between the cells for the tool is.
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-4.jpg)
I took the distance with a margin. Then I drew the rail into squares - these will be just the cells under the tool.
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-5.jpg)
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-6.jpg)
Then I measured the outer diameter of each tool, I added one millimeter to the distance so that everything would fit into its nests without problems.
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-7.jpg)
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-8.jpg)
I drilled the necessary holes deep in the middle of the rail.
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-9.jpg)
That is, the thickness of the tree I had was 20 mm, and the depth of the non-through hole was 10 mm, respectively.
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-10.jpg)
Now measure the inner diameter of each tool and add half a millimeter.
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-11.jpg)
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-12.jpg)
We drill internal through holes.
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-13.jpg)
I turned the board over and drew two lines for each hole.
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-14.jpg)
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-15.jpg)
Adjust the blade height.
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-16.jpg)
Carefully make cuts.
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-17.jpg)
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-18.jpg)
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-19.jpg)
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-20.jpg)
Then we grind all sides so that everything is smooth.
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-21.jpg)
Internal planes can be sanded with soft sandpaper.
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-22.jpg)
In order for the tools to enter easily, I made the grooves a little wider.
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-23.jpg)
It's time to varnish with the color of the stain.
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-24.jpg)
We give a day to dry.
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-25.jpg)
Then we install and arrange everything according to a pre-designed template.
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-26.jpg)
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-27.jpg)
And the mess is turning into order!
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-28.jpg)
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-29.jpg)
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-30.jpg)
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-31.jpg)
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-32.jpg)
Holders for squares.
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-33.jpg)
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-34.jpg)
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-35.jpg)
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-36.jpg)
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-37.jpg)
Stand for drill set.
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-38.jpg)
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-39.jpg)
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-40.jpg)
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-41.jpg)
Hole saw holder.
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-42.jpg)
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-43.jpg)
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-44.jpg)
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-45.jpg)
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-46.jpg)
They are made this way: a hole is drilled at an angle of 45 degrees and a round rail is inserted.
Other various holders.
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-47.jpg)
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-48.jpg)
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta-49.jpg)
As a result, we got such a beauty that only a real master can appreciate.
![](http://img.uaft2404.org/img/sdela-2019/derzhateli-dlya-instrumenta.jpg)
Thanks for reading and I hope you enjoyed it!
See the video for detailed instructions.
Share
Pin
Tweet
Send
Share
Send