TILDA HARE

Send

I have long wanted to put a serious bunny in my house, the personification of an office worker. Today I suggest you to create such a miracle with me. As always, the manufacture of any toy begins with preparation for the process.
You will need:

pattern on paper;
synthetic winterizer for stuffing dolls;
flax milk or other colors, preferably light shades;
floss for embroidery nose and eye;
satin ribbon for making slippers;
scissors, threads, needles;
two pencils, one of which is not sharpened;
a piece of thin cardboard for the sole of shoes, PVA;
light fabric on the shirt;
dark fabric for trousers;
any long silk piece for a scarf.

Translate the proposed pattern on paper or cardboard, cut along the contour.

Attach the parts to the fabric, gently circle with a pencil, fix with safety pins. This is done so that the fabric does not move when we sew.

Sew all the details along the contour except the sole for the feet. Cut, leave a small allowance, a maximum of 3-5 mm, the stock should be at least 5 mm on the soles.

The next operation will be the preparation of the legs. Fix the sole to the top with the needles.

Gently stitch the hare's legs.

At this point, I always make clothes. Because we will wear tilde gradually. Open pants, vest, shirt. I specially cut the vest without a shoulder seam, because the chrysalis is small, and it is very difficult to make small seams, especially for beginner needlewomen.

Pants sew by all the rules, as for adults. We begin to sew a shirt with a collar, which we then attach to the neck. Our sleeves are in the form of tubes.

Now back to our bunny. Iron the stitched details with an iron, and then twist. This is done in order to even out the seam, which may be delayed when sewing. We cut small holes in the details so that we can turn them on the front side. We turn out.

For stuffing synthetic winterizer I use an unrefined pencil. It is very convenient, easy.

At this stage, you can embroider the nose and eyes of our bunny rabbit and sew the legs. We sew them with buttons so that the doll stands.

We dress trousers, we fill a shirt. Sew on a button.

We insert the handles into the sleeves and fix them on the bunny. They can also be sewn on buttons or a secret seam, capturing the body.

Dress a sleeveless jacket and tie a scarf around the neck.

Our bunny is ready, but he has no shoes yet. For the manufacture of slippers, we need PVA glue, tape, cardboard and fabric patterns of the sole. We do a fabric pattern with an allowance of 1-1.5 cm.

We form the sole; for this, we collect along the contour of the pattern on a thread.

We coat with glue at the edges of the cardboard.

Tighten the thread and put under the press of several books for about an hour to dry the glue. After drying, we proceed to the formation of the upper shoe. We cut off the tape so that it turns around the perimeter of the sole, and there is 2 cm left to bend at the back.