When the home workshop does not have a lathe or normal emery, you have to use tools and tools to work on the workpieces. However, making an assistant for such work is not difficult.
One of the universal tools is an electric drill, which is as popular as a grinder in popularity. Therefore, in this review we will tell you how to make a convenient desktop holder for an electric drill.
As starting materials for the manufacture of this homemade product, you can use everything that will roll under your feet. In this case, these are cuttings of round pipes and pieces of metal. As you can see, getting the material for the desktop holder is not a problem.
The main stages of work
First of all, cut the pipes to size and end. If there is no miter saw, then this can be done with a grinder. Next, in one of the segments it is necessary to make a longitudinal cut. From a sheet of metal with a thickness of 3 mm, we cut out a drop-shaped figure.
After machining on a grinder in the center of the “drop”, it is necessary to weld a piece of steel pipe. After welding, we process the resulting part using a cord brush. We process corners with a file for metal. We weld the washer to the second segment.
The next step will require a piece of the channel. If such material is not at hand, you can make it from two pieces of the corner. In the designated area, we drill through holes, and then we cut the thread. In the middle we weld a stiffener.
In detail about how to make a homemade desktop holder for an electric drill with your own hands, you can see in the video on our website. Write in the comments how you make such a homemade product.
