Share
Pin
Tweet
Send
Share
Send
![](http://img.uaft2404.org/img/sdela-2019/ribki-iz-bumagi.jpg)
These beautiful fish can become a decoration in a children's room if you hang them on strings from the ceiling or to a chandelier. Then they will wave from the slightest breath of the wind, as if floating in the waves. And also, having made several fish from multi-colored paper, you can teach your child a simple account. Despite such a large number of photographs, this craft is simple, and even a preschooler will cope with it. And mother can help him a little in this.
To make such a fish, you will need a square sheet of colored paper. Fold it in half diagonally.
![](http://img.uaft2404.org/img/sdela-2019/ribki-iz-bumagi-2.jpg)
Expand and diagonally connect the other two opposite corners.
![](http://img.uaft2404.org/img/sdela-2019/ribki-iz-bumagi-3.jpg)
Expand the sheet again, flip it to the other side and fold it in half horizontally.
![](http://img.uaft2404.org/img/sdela-2019/ribki-iz-bumagi-4.jpg)
Now fold vertically and unfold. You will get such a blank.
![](http://img.uaft2404.org/img/sdela-2019/ribki-iz-bumagi-5.jpg)
Grasp the opposite corners of the square and connect them together and with the bottom corner.
![](http://img.uaft2404.org/img/sdela-2019/ribki-iz-bumagi-6.jpg)
You will get such a folded square.
![](http://img.uaft2404.org/img/sdela-2019/ribki-iz-bumagi-7.jpg)
Fold the two lower sides toward the center.
![](http://img.uaft2404.org/img/sdela-2019/ribki-iz-bumagi-8.jpg)
Bend the top corner down.
![](http://img.uaft2404.org/img/sdela-2019/ribki-iz-bumagi-9.jpg)
Expand the edges of the square.
![](http://img.uaft2404.org/img/sdela-2019/ribki-iz-bumagi-10.jpg)
Open the resulting "pocket" to a horizontal fold.
![](http://img.uaft2404.org/img/sdela-2019/ribki-iz-bumagi-11.jpg)
Wrap its edges inward along the marked lines.
![](http://img.uaft2404.org/img/sdela-2019/ribki-iz-bumagi-12.jpg)
You should get such a blank.
![](http://img.uaft2404.org/img/sdela-2019/ribki-iz-bumagi-13.jpg)
Bend the moving parts of the workpiece up.
![](http://img.uaft2404.org/img/sdela-2019/ribki-iz-bumagi-14.jpg)
Fold the sides of the figure in half.
![](http://img.uaft2404.org/img/sdela-2019/ribki-iz-bumagi-15.jpg)
![](http://img.uaft2404.org/img/sdela-2019/ribki-iz-bumagi-16.jpg)
Turn the trident shape down and bend the middle part as far as possible.
![](http://img.uaft2404.org/img/sdela-2019/ribki-iz-bumagi-17.jpg)
Return it to its original position and bend it to the right, combining the side and the horizontal bend.
![](http://img.uaft2404.org/img/sdela-2019/ribki-iz-bumagi-18.jpg)
Expand and align the left side with the new fold.
![](http://img.uaft2404.org/img/sdela-2019/ribki-iz-bumagi-19.jpg)
Bend the part to the same width on the right side.
![](http://img.uaft2404.org/img/sdela-2019/ribki-iz-bumagi-20.jpg)
With two fingers, grasp the corner of the workpiece and bend it up. This is part of the tail.
![](http://img.uaft2404.org/img/sdela-2019/ribki-iz-bumagi-21.jpg)
Turn the future fish to the other side so that the tail is on the left.
![](http://img.uaft2404.org/img/sdela-2019/ribki-iz-bumagi-22.jpg)
Bend the triangle in the middle from left to right.
![](http://img.uaft2404.org/img/sdela-2019/ribki-iz-bumagi-23.jpg)
![](http://img.uaft2404.org/img/sdela-2019/ribki-iz-bumagi-24.jpg)
Again, turn the craft from left to right on the other side and fold the figure in half vertically. Most of the rhombus will cover the tail, and a smaller part will become the head of the fish.
![](http://img.uaft2404.org/img/sdela-2019/ribki-iz-bumagi-25.jpg)
Connect the right corner of the rhombus to the left.
![](http://img.uaft2404.org/img/sdela-2019/ribki-iz-bumagi-26.jpg)
Connect the bottom of the moving part to the vertical fold.
![](http://img.uaft2404.org/img/sdela-2019/ribki-iz-bumagi-27.jpg)
Bend it and connect it with a new fold that has appeared.
![](http://img.uaft2404.org/img/sdela-2019/ribki-iz-bumagi-28.jpg)
Bend the top of this small part to the same width.
![](http://img.uaft2404.org/img/sdela-2019/ribki-iz-bumagi-29.jpg)
Grasp the corner with two fingers and bend it down. You got the second part of the tail.
![](http://img.uaft2404.org/img/sdela-2019/ribki-iz-bumagi-30.jpg)
![](http://img.uaft2404.org/img/sdela-2019/ribki-iz-bumagi-31.jpg)
Put together the two parts of the tail.
![](http://img.uaft2404.org/img/sdela-2019/ribki-iz-bumagi-32.jpg)
So the fish is ready. It remains only to draw a small eye for the fish and make it another girlfriend or a few.
Share
Pin
Tweet
Send
Share
Send